Dimensions: L X W X T (300mm X 100mm X 25mm)
Description: For both laboratory and field calibration of ultrasonic fault detection equipment. Our version of this block has a radius of 100mm, holes measuring 3.0mm and 50.0mm, reference mark scales that are etched, and two optional slots at the zero point that offer calibrating signals spaced out over a 100mm range. in line with ISO 2400 and EN 12223. The "V1/5 (A2)" Block from BS 2704, which is identical to this block but has a 1.5mm through hole rather than a 3.0mm hole, should not be confused with it. For more information on this block, visit our test block store.
Geometry: Two optional slots at the zero point that offer calibrating signals at intervals of 100mm range, 100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales
Material:
Description: For both laboratory and field calibration of ultrasonic fault detection equipment. Our version of this block has a radius of 100mm, holes measuring 3.0mm and 50.0mm, reference mark scales that are etched, and two optional slots at the zero point that offer calibrating signals spaced out over a 100mm range. in line with ISO 2400 and EN 12223. The "V1/5 (A2)" Block from BS 2704, which is identical to this block but has a 1.5mm through hole rather than a 3.0mm hole, should not be confused with it. For more information on this block, visit our test block store.
Geometry: Two optional slots at the zero point that offer calibrating signals at intervals of 100mm range, 100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales
Material:
- Carbon steel
- stainless steel
- Titanium
- Aluminum
- Alloy Steel
- Cupro
- NickelInconel etc...
- Availability: 100 In Stock
- Model: DT-91031
-
Brand:
Reviews
There are no reviews for this product.