NDT TRAINING & VALIDATION

Ultrasonic Testing Flawed specimens

UT flawed specimens for sensitivity, resolution, and defect characterization. Flat bottom holes, side-drilled holes, and natural flaws for ultrasonic calibration.

Flawed SpecimensUltrasonic Testing Flawed specimens

Browse Flawed Specimens

Find the perfect solution for your NDT requirements

Showing 12 of 28 products in Ultrasonic Testing Flawed specimens
UT Welded Flawed Specimen
Ultrasonic Testing Flawed specimens

UT Welded Flawed Specimen

UT Welded Flawed Specimen – Node Documentation: MUT Verification Report with all angles

Carbon Steel45° K-Tubular Weld Node Joint Ultrasonic Testing Flaw Specimen 12.5mm Geometry: Tubular Dihedral Angle 45°, Main Pipe Segment 20” Dia. 15 to 18 mm WT & Branch’s 6” Dia. 12.5 mm WT. Bevel Angle 45°
25MM SV PLATE TO PLATE UT FLAWED SPECIMENS
Ultrasonic Testing Flawed specimens

25MM SV PLATE TO PLATE UT FLAWED SPECIMENS

25MM SV PLATE TO PLATE UT FLAWED SPECIMENS Documentation: NDT Verification Reports and CAD Drawings and Test Sheets.

Carbon Steel: Plate to Plate Single V Butt Weld 300mm Long and 150 mm Wide on Either Side of The Weld thickness Range >10mm to 15 mm
25MM DV PLATE TO PLATE UT FLAWED SPECIMENS
Ultrasonic Testing Flawed specimens

25MM DV PLATE TO PLATE UT FLAWED SPECIMENS

25MM DV PLATE TO PLATE UT FLAWED SPECIMENS Documentation: NDT Verification Reports and CAD Drawings and Test Sheets.

Carbon SteelPlate to Plate Double V Butt Weld 300mm Long and 150 mm Wide on Either Side of The Weld thickness 25 mm
20MM SINGLE 'V' PLATE TO PLATE ADVANCED UT FLAWED SPECIMENS
Ultrasonic Testing Flawed specimens

20MM SINGLE 'V' PLATE TO PLATE ADVANCED UT FLAWED SPECIMENS

20MM SINGLE 'V' PLATE TO PLATE ADVANCED UT FLAWED SPECIMENS

Carbon SteelPlate to Plate Single V Butt Weld 300mm Long and 150 mm Wide on Either Side of The Weld thickness Range >10mm to 15 mm
15mm SINGLE 'V’ PLATE TO PLATE ADVANCED UT FLAWED SPECIMENS
Ultrasonic Testing Flawed specimens

15mm SINGLE 'V’ PLATE TO PLATE ADVANCED UT FLAWED SPECIMENS

15mm SINGLE 'V’ PLATE TO PLATE ADVANCED UT FLAWED SPECIMENS Documentation: NDT Verification Reports and CAD Drawings and Test Sheets.

Carbon SteelPlate to Plate Single V Butt Weld 300mm Long and 150 mm Wide on Either Side of The Weld thickness Range >10mm to 15 mm
6” PIPE TO PIPE UT FLAWED SPECIMENS
Ultrasonic Testing Flawed specimens

6” PIPE TO PIPE UT FLAWED SPECIMENS

6” PIPE TO PIPE UT FLAWED SPECIMENS Documentation: NDT Verification Reports and CAD Drawings and Test Sheets.

Carbon SteelPipe to Pipe Butt Weld Joint with Pipe152mm Dia. And 150 mm Wide on Either Side of The Weld thickness 20 mm
4” PIPE TO PIPE UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS)
Ultrasonic Testing Flawed specimens

4” PIPE TO PIPE UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS)

4” PIPE TO PIPE UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS) Documentation: NDT Verification Reports and CAD Drawings and Test Sheets

Carbon SteelPipe to Pipe Butt Weld Joint with Pipe 100mm Dia. And 150 mm Wide on Either Side of The Weld thickness 15 mm
3” PIPE TO PIPE UT FLAWED SPECIMENS
Ultrasonic Testing Flawed specimens

3” PIPE TO PIPE UT FLAWED SPECIMENS

3” PIPE TO PIPE UT FLAWED SPECIMENS Documentation: NDT Verification Reports and CAD Drawings and Test Sheets.

Carbon SteelPipe to Pipe Butt Weld Joint with Pipe76mm Dia. And 150 mm Wide on Either Side of The Weld thickness 10 mm
T JOINT 25MM DV PLATE TO PLATE UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS)
Ultrasonic Testing Flawed specimens

T JOINT 25MM DV PLATE TO PLATE UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS)

T JOINT 25MM DV PLATE TO PLATE UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS) Documentation: NDT Verification Reports and CAD Drawings and Test Sheets.

Carbon SteelPlate to Plate T Joint Single V Butt Weld with 300 mm Long and 200 mm Wide base and 150mm Wide t Plate in the Thickness Range of 12 mm to 15 mm
T JOINT 15MM SV UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS)
Ultrasonic Testing Flawed specimens

T JOINT 15MM SV UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS)

T JOINT 15MM SV UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS) Documentation: NDT Verification Reports and CAD Drawings and Test Sheets.

Carbon SteelPlate to Plate T Joint Single V Butt Weld with 300 mm Long and 200 mm Wide base and150mm Wide t Plate in the Thickness Range of 12 mm to 15 mm
TUBULAR NODES 15MM 70ᵒ UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS)
Ultrasonic Testing Flawed specimens

TUBULAR NODES 15MM 70ᵒ UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS)

TUBULAR NODES 15MM 70ᵒ UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS) Documentation: NDT Verification Reports and CAD Drawings and Test Sheets.

Carbon SteelTubular Nodes Dihedral Angle 70ᵒ Main Pipe Segment 500mm Dia. 20 to 25 mm WT & Branch 200mm Dia. And 15 mm
TUBULAR NODES 15MM 60ᵒ UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS)
Ultrasonic Testing Flawed specimens

TUBULAR NODES 15MM 60ᵒ UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS)

TUBULAR NODES 15MM 60ᵒ UT FLAWED SPECIMENS (AS PER BINDT PCN CLASSIFICATION SPECIMENS) Documentation: NDT Verification Reports and CAD Drawings and Test Sheets.

Carbon SteelTubular Nodes Dihedral Angle 60ᵒ Main Pipe Segment 500mm Dia. 20 to 25 mm WT & Branch 200 Dia. And 15 mm